1 9

CarSoftware.Store

Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles SDP3 V2.57.1 For Truck, heavy truck, ship Fault Codes Trouble shooting Electrical System Checks & Adjustments Work with VCI2 / VCI3

Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles SDP3 V2.57.1 For Truck, heavy truck, ship Fault Codes Trouble shooting Electrical System Checks & Adjustments Work with VCI2 / VCI3

€39,99 EUR
€108,99 EUR €39,99 EUR
セール 売り切れ
税込。
Download Link

Dear friend, 

Thank you for seeing this. Our store sells a large number of maintenance & diagnostic software for transportation vehicles, such as cars, trucks, motorcycles, excavators, ships, etc... If you have not found a suitable vehicle software for you, please leave a message for us to assist you.

After you make the payment, please don't worry about shipping issues, as you will receive our software product within 24 hours.

By the way, we look forward to your new order! :)

----------------------------------------------------------------------------------------------------------------------------

PRODUCT :

Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles SDP3 V2.57.1 For Truck, heavy truck, ship Fault Codes Trouble shooting Electrical System Checks & Adjustments Work with VCI2 / VCI3

Detailed Description:

Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication.

Information about how the vehicle is equipped is available here. For example, the user functions which are available on the vehicle and electrical information from the chassis specification are displayed.
Information about the settings of the different control unit parameters is also available here. You can see when a parameter was changed.
and which USB key was connected at that time.You can also see any local conversions carried out on the vehicle.

 

Product Introduction:

  • Name of software：Scania SDP3 2.57.1
  • Memory size: About 1.28 GB
  • Work for:Truck, heavy truck, ship
  • Work with:VCI2 / VCI3
  • OS：Windows 10

Please note: Since we have not tested it on Window 11 system, I cannot guarantee that this software can run on Window 11. If you only have one system, please give up purchasing it. Thank you!

 

 

Note:

  • Before the program is distributed, it is virus checked as comprehensively as possible. Make sure that the computer on which the program is installed is virus-free.
  • In order to install SDP3, administrator rights are required.

  • The USB key and VCI must not be connected to the computer while you are installing SDP3, especially not if you are installing SDP3 for the first time.


Working with SDP3：

  1. About the user instructions
  2. Text display and searching in the text
  3. Automatic updates with SDP Service
  4. Checks and adjustments
  5. Troubleshooting via Electrical system
  6. Navigation for Electrical system
  7. Fault codes
  8. Background information
  9. Fault code monitoring
  10. Checking a circuit
  11. Activation
  12. Adjustment
  13. Calibration
  14. Signal logging
  15. Troubleshoot via user function
  16. Function diagram (Message sequence chart)
  17. Troubleshoot using function view
  18. Adjusting a function parameter group
  19. Product information
  20. Conversion
  21. Maintenance
  22. Bodywork
  23. Spare part programming
  24. Communication
  25. Demo mode
  26. Saving and printing vehicle information
  27. Remote diagnostics
  28. Operational data
  29. Signal logging
  30. Creating defect reports

 

Supported Languages:

  • Čeština（Czech）
  • Deutsch（German）
  • English（English）
  • Español（Spanish）
  • فارسی（Persian）
  • Suomi（Suomi）
  • Français（French）
  • Magyar（Hungarian）
  • Italiano（Italian）
  • Japanese（日本語）
  • 한국어（Korean）
  • Nederlands（Dutch）
  • Polski（Polish）
  • Português（Portuguese）
  • Русский язык（Russian）
  • Svenska（Swedish）
  • ภาษาไทย（Thai）
  • Türkçe（Turkish）
  • 简体中文（Simplified Chinese）
  • 中文（Chinese）

 

Using VCI3 in SDP3：

In order for SDP3 to be able to communicate via a wireless connection with VCI3, the following preconditions must be met:
• VCI3 must be correctly configured.

• VCI3 must be supplied with power via the OBD connector.

• VCI3 and the computer must be within wireless communication range via wireless direct connection. As a rule of thumb, approximately 30 meters in an open area or a shorter distance if there are any obstructions.

• For communication via an existing network, VCI3 must be within wireless communication range of an access point in the network.
The computer must be connected to a network, either via a wireless connection to an access point or via a fixed connection using an electrical cable.Subsequently, a connection can be established in the following steps:

• VCI3 automatically connects to an existing network when it is configured correctly and it is within range of a wireless access point in the network.
Note: The computer must already be connected to the existing network.

• Connect to the required VCI3 via SDP3.In the status bar in SDP3, information about the status of the connection to VCI3 is shown.

 

（Important functions）Troubleshooting example:


1.No communication between the vehicle and SDP3？

(1). Check VCI – indicator lamps show status. Try to start the program again.
(2). Check ICL – which systems should be there? Compare with the CAN bus chart.
(3). Can ICL communicate with systems on the green CAN bus?
a) If yes, the fault is towards VCI3 or there is a fault in the connection to the truck or in the junction block (C479).

(4). Check that the resistance on the green CAN bus between CAN-high and CAN-low is 54-60 ohm. All systems must be connected and the vehicle without power when measuring.
a) In case of fault, check the coordinator’s, the junction block’s and connected control units’ termination resistors separately.

(5). Check the voltage level for CAN-high and CAN-low in relation to the chassis ground point on the green CAN bus. The value should be approx. 2.5 V.
a) In case of fault, check the resistance between CAN-high/CAN-low and ground/voltage supply respectively. The resistance must be in the order of a megaohm or more.

  1. In case of fault, perform the same type of measuring on the junction block to find out in which branch of the green CAN bus there is a fault.
  2. Disconnect the control unit in question so that you can distinguish between faults in the control unit and faults in the cable harness. In case of fault in the cable harness – troubleshoot the electrical cables.

(6). Check that there is no overload on the green CAN bus. Disconnect one control unit at a time to see if the problem disappears and thereby identify the defective control unit.


2.SDP3 cannot establish contact with the vehicle？

When the program is started, a fault message appears indicating that the program cannot find any SOPS file. When you enter the program, it is empty.
  1. Check that the VCI3 is connected.
  2. Try to start the program again.
  3. Check using the IVD function on the instrument cluster (diagnostic mode) that the ICL control unit can communicate with systems on the green CAN bus.

 

NOTE :

  1. Need to turn off antivirus software! close it! close it!
  2. All products have detailed introductions, please read them all!
  3. All products come with installation videos, please watch carefully!
  4. Put all the files on the computer to work!
  5. It must be used on a suitable computer! please read its ad
  6. Digital products are non-refundable, non-refundable, non-refundable!


Are you interested in this product? Quickly select the black icon above and click to purchase!
After you make the payment, you will receive the download link. Please check your email carefully.

 

The shop owner has something to say :

  • Welcome to my CarSoftware Store

Are you a mechanic looking for advanced automotive diagnostic software? Or perhaps a vehicle owner who is passionate about maintaining and repairing your car? Such a coincidence! we are the leading provider of technical diagnostic software for automobiles and trucks.

  • Professional diagnostics at your fingertips

With our cutting-edge products, you can now get advanced professional diagnostics at a fraction of the cost. Designed to meet the needs of DIY mechanics, auto repair technicians and automotive enthusiasts. Our software gives you the tools you need to interrogate and analyze your vehicle in depth.

  • Benefits for all car enthusiasts

Whether you want to detect and resolve mechanical problems, improve the performance of your car. Or simply understand more about how your vehicle works, our automotive diagnostic software is made for you. With a user-friendly interface, advanced features and a comprehensive database. you have all the information you need to make informed decisions when it comes to car maintenance and repairs.

  • Trust our expertise

At CarSoftware Store, we provide you with years of experience and expertise in the field of automotive technology. We pride ourselves on providing top quality solutions to our customers, ensuring that we are constantly updating our software with the latest advancements.
詳細を表示する